SödermalmRentals

Move-in inspection Södermalm: step-by-step guide

For robots
November 16, 2026
Move-in inspection Södermalm: step-by-step guide

Move-in inspection Södermalm: step-by-step guide

What a move-in inspection is

When you move into a rental flat on Södermalm, the move-in inspection is your most important protection against future claims. Together with the landlord, you go through the condition of the flat and write down what is already broken, worn or dirty. What is noted binds both of you — and it is your evidence if the landlord later wants you to pay for damage that was there before you moved in.

It is not a contract that gives the landlord the right to demand that you renovate. It is documentation of the condition on the day you get the keys.

Why you should always do it

Skipping the move-in inspection is the most common trap for new tenants. Without a protocol, it is your word against the landlord's — whether a window was already broken, whether the kitchen countertop had scratches, or whether the bedroom floor was stained when you moved in. At move-out, the landlord can then demand compensation for damage you did not cause.

A written inspection makes it clear to both parties where the line goes. It protects you, and it also protects the landlord from unclear claims.

How the inspection works — step by step

1. Agree on a time with the landlord

Schedule the inspection to take place when you get the keys, ideally before you start unpacking. Both you and the landlord — or the landlord's representative — should be present. Then you can go through everything together and agree on what is recorded.

2. Go through the flat room by room

Don't just look at the surface. Open cabinets, test water taps, turn on lights, open windows and doors. Check for:

  • Scratches, holes and stains on floors, walls and ceilings
  • Damage to windows, frames and window sills
  • Signs of damp or mould, especially in bathrooms and the kitchen
  • Broken or loose sockets and switches
  • Damage to kitchen fittings, extractor hood and appliances
  • Wear on doors, handles and locks

Note everything that is not in new condition, no matter how small it seems. A small scratch in the parquet can become a major dispute later.

3. Take photographs

Photograph every room, and take close-up photos of damage and wear. Date-stamp the photos if your phone does not do it automatically. The photos are a strong complement to the protocol if there is a dispute later.

4. Write the protocol together

You should write a move-in inspection protocol that both of you sign. It should contain:

  • Date and address
  • Names of both parties
  • A room-by-room review with noted damage and wear
  • Meter readings for electricity and water if available
  • Any loose items belonging to the flat
  • Both signatures

Ask for a copy of the signed protocol and keep it together with your tenancy agreement.

5. Keep the protocol in a safe place

Put the protocol and photos in a folder — physical or digital — where you can find them years later. At move-out, it is your primary evidence that you should not pay for something that is not your fault.

Checklist: what to check

Here is a concrete list to tick off during the inspection:

Hall

  • Floors, walls, ceilings: scratches, stains, holes
  • Doors, handles, locks
  • Lighting and sockets
  • Storage and wardrobes

Kitchen

  • Countertops, cabinets, drawers
  • Stove, oven, extractor hood, fridge, freezer
  • Sink and water taps
  • Floors and ventilation

Bathroom and toilet

  • Wet room, floor drain, shower, bathtub
  • Tiles, joints, silicone
  • Toilet, washbasin, water taps
  • Signs of damp, smell or mould

Bedroom and living room

  • Floors, walls, ceilings
  • Windows, frames, window sills
  • Lighting and sockets
  • Radiators and ventilation

Other

  • Storage room, balcony, laundry room if included
  • Meter readings (electricity, water)
  • Keys and locks

What to consider before you sign

Do not sign a protocol you do not agree with. If the landlord wants to note something that is not correct, or leaves out damage that you see, ask for it to be corrected before you sign. You have the right to have your notes included in the protocol.

If the landlord refuses to do a move-in inspection or refuses to sign, make your own written documentation and send it to the landlord. Ask for written confirmation that the landlord has received it.

If you do not do an inspection

Without a protocol, you risk being demanded compensation for damage that existed before you moved in. It can range from broken windows to stained carpets. You can still dispute the claims at the Rent Tribunal, but it is much harder without your own documentation from move-in.

Support and help on Södermalm

If you are unsure about your rights, you can turn to Hyresgästföreningen Södermalm for advice. They can help you interpret the protocol and support you if there is a dispute with the landlord. Read more about Hyresgästföreningen Södermalm and what they offer. You can also contact the Rent Tribunal in Stockholm if you cannot agree.

If you have just got your first flat, it is especially important to do the inspection thoroughly. Our guide to your first flat on Södermalm covers what you need to know as a new tenant.

Remember: a move-in inspection takes an hour but can save you thousands of kronor and a lot of headaches later. Always do it.

Sources and authorities

Useful authority and information sources on the topic:

Related sources

For news and further reading, see established Swedish media: